Skip to Main Content


Tip Radius (nm)
Nom: 30
Max: 36
Frequency (KHz)
Nom: 55
Min: 35
Max: 75
Length (µm)
Nom: 110
Min: 100
Max: 120
Spring Const (N/m)
Nom: 0.25
Min: 0.10
Max: 0.40
Width (µm)
Nom: 40
Min: 38
Max: 42
Price: $599.50 (USD)
Sold in packs of 5
Questions? Free, Online Consulting

Building on the superior imaging performance of the ScanAsyst Air HPI probe, the ScanAsyst-Air-HPI-30 provides accurate nanomechanical mapping on very soft samples in air with controlled end radius and laser Doppler vibrometer calibrated spring constants.

End radii are controlled to 30nm +/- 15%. Spring constants are individually calibrated and guaranteed within 10% . Parameters are contained in the QR code on the box for fast and error free reading with the QR reader included with Bruker’s new PeakForce QNM high accuracy kit available for Dimension Icon. The low nominal 0.25N/m spring constant is most suitable for extremely soft polymer samples (typically kPa to MPa range). For stiffer samples, see the whole series of calibrated probes.

- Nanomechanical mapping with FFV or PFQNM on Dimension Icon
- Controlled 30nm end radius
- Individually calibrated spring constant, 0.25N/m nominal
- Parameters contained in QR code
- One pack of 5 probes

Tip Specification
SAA-HPI-30 Tip Image
Tip Height (h): 3-8 µm
Front Angle (FA): 15º
Back Angle (BA): 25º
Cantilever Specification
SAA-HPI-30 Cantilever Image
Material: Silicon Nitride
Geometry: Special
Cantilevers Number: 1
Cantilever Thickness (Nom): 0.58µm
Cantilever Thickness (RNG): 0.53-0.63µm
Back Side Coating: Reflective Al