Skip to Main Content
Close
0
Probes → SAA-HPI-SS
High Performance
New

SAA-HPI-SS

SCANASYST-AIR-HPI-SS
Geometry
Special
Tip Radius (nm)
Nom: 1
Max: 2
Frequency (KHz)
Nom: 55
Min: 35
Max: 75
Length (µm)
Nom: 110
Min: 100
Max: 120
Spring Const (N/m)
Nom: 0.25
Min: 0.10
Max: 0.40
Width (µm)
Nom: 40
Min: 38
Max: 42
4 Total Related Products
SCANASYST-AIR

SCANASYST-AIR is the #1 selling probe for imaging materials samples in air! The original probe of choice for the mode of the same name available on Dimension Icon, Dimension Edge, MultiMode, BioScope Resolve and other current and legacy Bruker AFMs.

 

The SCANASYST-AIR probe features a single, V-shaped, Al reflex coated cantilever with a low spring constant. Paired with a very sharp tip, it is perfectly suited for high resolution imaging on most samples. Used in conjunction with Peak Force Tapping technology, Bruker AFMs can also employ automatic scan optimization using this probe. Expert level imaging every time!


View...
SCANASYST-FLUID
ScanAsyst-Fluid probes have an intentionally dull tip ideal for force measurements and imaging extremely delicate samples in fluid.  For a sharper ScanAsyst tip for fluid imaging please use the ScanAsyst-Fluid+.

ScanAsyst utilizes a Bruker proprietary method for curve collection and sophisticated algorithms to continuously monitor image quality, and to automatically make appropriate parameter adjustments.  This enables:

- Automatic image optimization for faster, more consistent results, regardless of user skill level.
- Direct force control at ultra-low forces to protect delicate samples and tips from damage.
- Elimination of cantilever tuning, setpoint adjustment, and gain optimization to make even fluid imaging simple. 

For use only on ScanAsyst-enabled Dimension Icon, MultiMode 8, and BioScope Catalyst AFMs.  See the cantilever orientation diagram here.  All ScanAsyst probes have <2 degrees of cantilever bend.
View...
SCANASYST-AIR-HR
ScanAsyst-Air-HR probes are specifically designed for use with the ScanAsyst-HR fast scanning accessory on the MultiMode 8 AFM.  Enjoy up to 20X faster survey scan rates and up to 6X faster scans with no loss of resolution.  This remarkable development leverages Brukers exclusive ScanAsyst® Self-Optimizing Atomic Force Microscopy Imaging Mode, which has established itself as the industry standard for AFM ease of use.  The result is the high-speed ScanAsyst-HR - an imaging mode not just capable of high resolution at fast speeds, but also incredibly easy to use.

If you have an older MultiMode model please contact Bruker to find out how to upgrade it to a MultiMode 8 AFM with high speed ScanAsyst-HR.View...
SCANASYST-AIR-HPI

SCANASYST-AIR-HPI is an improved version of SCANASYST-AIR! If you use SCANAYST-AIR probes, this new version will almost certainly improve your imaging.

 

The SCANASYST-AIR-HPI probe features a paddle shaped, Al reflex coated cantilever with an even lower spring constant than the original probe. The new cantilever reduces optical interference and preserves the tip sharpness for longer. The tip has the same end radius as the original probe but with a higher aspect ratio meaning more symmetrical imaging and reduced convolution for even better data. As with the original probe, used in conjunction with Peak Force Tapping technology and automatic scan optimization = expert level imaging every time!




View...
Order a free SAA-HPI-SS sample
Price: $892.50 (USD)
Sold in packs of 10
+
-
Shipping Info
Probe Selection Guide
Email Us
Questions? Free, Online Consulting
+1 (800) 715-8440
Overview
New super sharp probes for highest resolution imaging in air on the widest sample range.

Optimized for PeakForce Tapping operation in air.  Recommended for use with any PeakForce Tapping enabled Bruker AFM.  Combines a tip with 1 nm nominal end radius and moderate 0.25 N/m spring constant for reliable highest resolution imaging on any sample, including highly reflective samples.  Resonant frequency 55 kHz in air.



300 nm image resolving sharp ridges on a Nioprobe sample.  Acquired on a Dimension Icon using PeakForce Tapping, with SCANASYST-AIR-HPI-SS probes.
Tip Specification
SAA-HPI-SS Tip Image
Tip Height (h): 3-8 µm
Front Angle (FA): 15º
Back Angle (BA): 25º
Cantilever Specification
SAA-HPI-SS Cantilever Image
Material: Silicon Nitride
Geometry: Special
Cantilevers Number: 1
Cantilever Thickness (Nom): 0.58µm
Cantilever Thickness (RNG): 0.53-0.63µm
Back Side Coating: Reflective Al
© 2024 Bruker AFM Probes, All Rights Reserved.
Loading...