Skip to Main Content

RTESP-150

RTESP-150
Geometry
Rectangular
Tip Radius (nm)
Nom: 8
Max: 12
Frequency (KHz)
Nom: 150
Min: 90
Max: 210
Length (µm)
Nom: 125
Min: 115
Max: 135
Spring Const (N/m)
Nom: 5
Min: 1.5
Max: 10
Width (µm)
Nom: 35
Min: 33
Max: 37
Order a free RTESP-150 sample
Price: $393.75 (USD)
Sold in packs of 10
+
-
Questions? Free, Online Consulting
Overview

A pack of 10 High quality etched silicon probes for soft TappingMode™ and other non-contact modes.  Unmounted for use on standard AFM's.

Bruker's flagship MPP probes are the preferred choice for high-sensitivity silicon probe imaging in TappingMode or non-contact mode in air.  Every aspect of the MPP design has been optimized to provide the most accurate profiling of microscopic features.  With precisely controlled cantilever geometry to enable repeatable scanning parameters, an extra sharp tip radius to reduce the AFM's minimum detectable feature size, and a taller tip to minimize squeeze film damping, the MPP is the industry standard for high-performance and high-quality imaging on a wide variety of sample types. 

The new design provides:
•         Tighter dimensional specifications for improved probe to probe consistency
•         Tighter alignment of the tip apex to the cantilever resulting in easier laser positioning over the tip
•         Improved probe quality & aesthetics  

This AFM probe is unmounted for use on any AFM and is also available with Aluminum reflex coating as model RTESPA-150. Download the datasheet to learn more.

 

Tip Specification
RTESP-150 Tip Image
This probe uses a rotated tip to provide a more symmetric representation of features over 200nm.
Tip Height (h): 10 - 15 µm
Front Angle (FA): 15 ± 2º
Back Angle (BA): 25 ± 2º
Side Angle (SA): 17.5 ± 2º
Cantilever Specification
RTESP-150 Cantilever Image
Material: 0.01 - 0.025 Ωcm Antimony (n) doped Si
Geometry: Rectangular
Cantilevers Number: 1
Cantilever Thickness (Nom): 1.75µm
Cantilever Thickness (RNG): 1.0 - 2.5µm
Loading...