Skip to Main Content
Close
0
Probes → PR-UM-CnIR-B-10

PR-UM-CnIR-B-10

PR-UM-CnIR-B-10 View Larger
Geometry
Rectangular
Tip Radius (nm)
Nom: 20.0
Max: 35.0
Frequency (KHz)
Nom: 13
Min: 10
Max: 16
Length (µm)
Nom: 450
Min: 430
Max: 470
Spring Const (N/m)
Nom: 0.2
Min: 0.1
Max: 0.4
Width (µm)
Nom: 50
Min: 45
Max: 55
1 Total Related Products
PR-EX-CnIR-B-10

A 10 pack of probes for contact mode imaging and nanoIR spectroscopic measurements. Pre-mounted on half washer mounts (link 1560-00) specifically for use in Brukers nanoIR platform.


This contact mode probe has a full wrap gold coating, on the reflex side — for increased feedback laser signal, on the tip side — to enable nanoIR.

View...
Price: $420.00 (USD)
Sold in packs of 10
+
-
Shipping Info
Probe Selection Guide
Email Us
Questions? Free, Online Consulting
+1 (800) 715-8440
Overview

A 10 pack of probes for contact mode imaging and nanoIR spectroscopic measurements. Unmounted for use on Bruker's IconIR system or others systems that can take a standard cantilever chip.


This contact mode probe has a full wrap gold coating, on the reflex side — for increased feedback laser signal, on the tip side — to enable nanoIR measurements.

Tip Specification
PR-UM-CnIR-B-10 Tip Image
Au tip side coating on the cantilever and pyramidal tip specifically to enable nanoIR measurements.
Tip Height (h): 12.5 ± 2.5 µm
Front Angle (FA): 25.0º
Back Angle (BA): 15.0º
Side Angle (SA): 22.5º
Cantilever Specification
PR-UM-CnIR-B-10 Cantilever Image
Au reflex coating on the backside of the cantilever increases the feedback laser signal on the photodetector.
Material: 0.010-0.025Ohmcm Antimony (n) doped Si
Geometry: Rectangular
Cantilevers Number: 1
Cantilever Thickness (Nom): 2 umµm
Back Side Coating: Au 50 nm
© 2024 Bruker AFM Probes, All Rights Reserved.
Loading...