Skip to Main Content
Close
0
Probes → VITA-HE-GLA-1

VITA-HE-GLA-1

VITA-HE-GLA-1
Geometry
Thermal
Frequency (KHz)
Nom: 50
Min: 0
Max: 0
Length (µm)
Nom: 150
Min:
Max:
Spring Const (N/m)
Nom: 0.5
Min: 0
Max: 0
4 Total Related Products
VITA-CH-IN
VITA Cantilever holder for Innova SPMs. Allows VITA nTA and SThM probes to be used with Innova SPM.
View...
VITA-TS-STHM
VITA Scanning Thermal Microscopy, SThM, test sample. Allows user to become familair with SThM technique on Veeco SPM.
View...
VITA-CS-NANOTA
VITA nTA Calibration Sample Set consisting of three polymer samples with known transition temperatures. These sample allow for temperature calibration of each nTA probe.

The melt transitions for each of them are:
a) Think film samples of polycaprolactone (PCL, Tm = 55º C)
b) High density polyethylene (HDPE, Tm = 116º C)
c) Polyethylene terephthalate (PET, Tm = 235º C)
View...
VITA-HE-NANOTA-200
NanoTA probes for MultiMode, Innova, and Caliber SPMs, 200 micron length.

Note:
Requires specialized probe holder model VITA-CH-IN when used withInnova/Caliber AFMs, and holder model VITA-CH-MM-HE when used withMultiMode AFMs.
Specifically designed for use with VITA module.  Uses other than with VITA module void probe warranty.
View...
Price: $2,450.00 (USD)
Sold in packs of 5
+
-
Shipping Info
Probe Selection Guide
Email Us
Questions? Free, Online Consulting
+1 (800) 715-8440
Overview
SThM probes for MultiMode, Innova and Caliber SPMs, 150 micron length.

Note:
Requires specialized probe holder model VITA-CH-IN when used with Innova/Caliber AFMs, and holder model VITA-CH-MM-HE when used with MultiMode AFMs.
Specifically designed for use with VITA module.  Uses other than with VITA module void probe warranty.
Highly static sensitive.  Do not measure resistance with conventional resistance meters.
Not compatible with previous generation SThM application modules.
Tip Specification
VITA-HE-GLA-1 Tip Image
Scanning Thermal Microscopy probes are specially designed contact mode probes that incorporate a thin metal film near the apex of the probe. The probes are mounted on a precision support. Measurement Mode: Temperature contrast; Lateral Resolution: <100 nm (dependent on probe); Temp. Resolution: <0.1° C (dependent on probe); Max. Temperature: 160° C (dependent on probe) Note: Requires specialized probe holder (part of the VITA module) when used with Innova AFM. Specifically designed for use with VITA module. Uses other than with VITA module void probe warranty. Highly static sensitive. Do not measure resistance with conventional resistance meters. Not compatible with previous generation SThM application modules.
Tip Height (h): 10 µm
Cantilever Specification
VITA-HE-GLA-1 Cantilever Image
Geometry: Rectangular
Cantilevers Number: 1
© 2024 Bruker AFM Probes, All Rights Reserved.
Loading...