Skip to Main Content
Close
0
AFM → NEOS/ Senterra → PR-SR10

PR-SR10

PR-SR10
Geometry
Rectangular
Frequency (KHz)
Nom: 330
Min: 204
Max: 497
Length (µm)
Nom: 125
Min: 135
Max: 115
Spring Const (N/m)
Nom: 42
Min: 10
Max: 130
Width (µm)
Nom: 30
Min: 22.5
Max: 37.5
Price: $2,225.00 (USD)
Sold in packs of 10
+
-
Shipping Info
Probe Selection Guide
Email Us
Questions? Free, Online Consulting
+1 (800) 715-8440
Overview
Conductive diamond coated non-contact probes with alignment grooves for Brukers NEOS and NEOS SENTERRA AFMs.
k = 42 N/m, f = 330 kHz
Tip radius < 300 nm
Tip Specification
PR-SR10 Tip Image
The diamond coating is highly doped and the total rsistance measured in contact to a platinum surface is < 3 kOhm.
Cantilever Specification
PR-SR10 Cantilever Image
The Aluminum reflective coating on the backside of the cantilever increases the laser signal (A+B) by up to 2.5 times. Although not necessary for general imaging, reflective coating is recommended for thin cantilevers (< 2.5 µm), highly reflective samples, and machine vision applications.
Material: 0.01 - 0.025 Ωcm Antimony (n) doped Si
Geometry: Rectangular
Cantilevers Number: 1
Cantilever Thickness (Nom): 4µm
Cantilever Thickness (RNG): 3 - 5µm
Back Side Coating: Reflective Aluminum
Top Layer Back: 30 nm Al
© 2022 Bruker AFM Probes, All Rights Reserved.
Loading...