Skip to Main Content

TESPD

TESPD
Geometry
Rectangular
Tip Radius (nm)
Nom: 18
Max: 21
Frequency (KHz)
Nom: 320
Min: 270
Max: 400
Length (µm)
Nom: 117
Min: 115
Max: 120
Spring Const (N/m)
Nom: 40
Min: 20
Max: 75
Width (µm)
Nom: 33
Min: 28
Max: 38
Price: $750.00 (USD)
Sold in packs of 10
Order a free TESPD sample
Questions? Free, Online Consulting
+1 (800) 715-8440
Overview
A pack of DLC coated Silicon Probes.
Quantity = 10

Bruker's Value Line Probe with hardened Diamond-Like Carbon (DLC) coating for increased tip lifetime.

Specifications:
- Diamond-Like Carbon coating on tip.
- Tip radius of 18nm nominal.
- 40N/m, 320kHz, Al Reflective Coating.
- Unmounted for use on any AFM.
Tip Specification
The diamond like carbon (DLC) coating is used to harden the tip to increase its lifetime. The tradeoff for the increased lifetime is that the coating also increases the diameter of the tip. This DLC film is insulating, for applications requiring a conductive hardened film, consider the Doped Diamond line of probes (DDESP-V2 or DDESP-FM-V2).
Tip Height (h): 10 - 15 µm
Front Angle (FA): 25 ± 2.5º
Back Angle (BA): 15 ± 2.5º
Side Angle (SA): 22.5 ± 2.5º
Cantilever Specification
The Aluminum reflective coating on the backside of the cantilever increases the laser signal (A+B) by up to 2.5 times. Although not necessary for general imaging, reflective coating is recommended for thin cantilevers (< 2.5 µm), highly reflective samples, and machine vision applicaiton.
Material: 0.01 - 0.025 Ωcm Antimony (n) doped Si
Geometry: Rectangular
Cantilevers Number: 1
Cantilever Thickness (Nom): 3.5µm
Cantilever Thickness (RNG): 2.8 - 4.2µm
Back Side Coating: Reflective Aluminum
Loading...
<