Home → Product
Easy Product Wizard
Search Products Clear selection


Product Description:

Olympus AC240TS-R3 AFM tip.

Outstanding features of the OLTESPA-R3 visible apex tip:

1) Easily access where you want to see:
The visible apex tip is located on the very end of the cantilever. This allowsyou to set the tip over a point of interest on the sample, easily andprecisely, especially if you use an AFM combined with an optical microscope such as the BioScope Catalyst. Clickhere for an example.

2) High lateral resolution:
A sharper tip is required for revealing a sample surface much moreprecisely. Tetrahedral shape is ideal for obtaining a point terminatedtip. Actually, the radius of the curvature of the visible apex tip is verysmall and the average is less than 10nm even with the Aluminum reflexcoating.
The OTESPA probes cover a wide range of applications,however, it is outstanding in the observation of crystal surfaces, thinfilm, IC devices and so on. Clickhere for an example image of the high resolution capabilities of this probe.

3) Observation of rugged samples:
The tip is thin with the tip angle of 35 degrees. So this tip enables you to observe anarrower part of the sample.
Furthermore, the visible apex tip is a tilted tip, so substantialtip angle decreases more when it is attached to a chip holder in yourAFM with certain tilt angle (probably, 5 to 20 degrees).The tip is effective for observing a rugged samples.

Check Scan line profile and enlarged view of the tip apex.

The current model OLTESPA is available for ordering through early 2014 at which point, it will become obsolete.

Add To Cart

Model Instrument Mount Pack Size Price Pack Quantity
OLTESPA-R3 All Unmounted 10 $375.00 (USD)

Quantity discounts available

2-6$318.75 (USD)
7-16$281.25 (USD)
17-24$243.75 (USD)
25+$225.00 (USD)

Shape Resonant Freq. kHz Spring Const. N/m Length µm Width µm
Nom. Min. Max. Nom. Min. Max. Nom. Min. Max. Nom. Min. Max.
Rectangular 70 50 90 2 0.6 3.5 240 225 255 40 38 42

Tip Specification

Geometry: Visible Apex
Tip Height (h): 9 - 19µm
Front Angle (FA): 0 ± 1º
Back Angle (BA): 35 ±1 º
Side Angle (SA): 18 ±1 º
Tip Radius (Nom): 7 nm
Tip Radius (Max): 10 nm
Tip SetBack (TSB)(Nom): 0 µm

Cantilever Specification

Aluminum reflective coating on the backside of the cantilever. The Al Reflective coating increases the laser signal (A+B) by up to 2.5 times. Although not necessary for general imaging, reflective coating is recommended for thin cantilevers, highly reflective samples, and machine vision applications.
Material: 0.01 - 0.02 Ωcm Silicon
Geometry: Rectangular
Cantilevers Number: 1
Cantilever Thickness (Nom): 2.3 µm
Cantilever Thickness (RNG): 1.6 - 3.0 µm
Back Side Coating: Reflective Aluminum
Top Layer Back: 100 nm of Al
Optional Product Offerings
A pack of Silicon Probes.Quantity=10Bruker's Value...
Details | Shop
A pack of Silicon Probes. Quantity=10Bruker's Valu...
Details | Shop
A pack of 10 High quality etched silicon probes fo...
Details | Shop
***Note: Bruker has launched an improved FESPA-V2 ...
Details | Shop